Vase Mode Gold Pan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
light, flexible and quick to print Gold pan
- Rating
- 4.75 / 5
- Likes
- 153
- Downloads
- 1,089
- Makes
- 7
- Views
- 4,239
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- GNU General Public License v2.0
This gold pan is light, flexible and quick to print, this is my second version.
Printed in vase mode, with PETG, 1mm nozzle, and 0.3mm layer height in less than 2 hours.
Depend of your printer, but my Ender 5 need the print speed to be set to maximum 30mm/s with the original head.
I set the k-factor to 0
This time, I used PETG, because the first version didn't survive to the hot summer.
I don't have any gold river near me, if somebody have some success with it, let me know, and post your print.
I let you the Openscad source code file,
if you modify it, please, share your modification!
Good print, and have some fun with it!
Notes:
extrusion width = 1.2
K-Factor = 0
first layer = 0,5
layer = 0,3
print speed = 30mm/s
Nozzle = 1mm
Vase Mode