1 / 3
IKEA Skådis Mount (snug fit)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Alternative mounting set for IKEA Skådis. Using drywall screws and snug fits
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 29
- Makes
- 0
- Views
- 204
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Alternative mounting set for IKEA Skådis.
These mounts fit snugly into the elongated peg holes and are designed to use countersunk drywall screws, (DIN 18182 and similar) right through the 4mm holes. The cap covers the screws by snapping it on.
Nozzle size:
- 0,4 mm
Layer height:
- for the big part, (Part B) 0,2 mm layer height is enough.
- 0,16 (or 0,12) mm for the cap and cover (Part A, Part C)
For acceptable strength, I found 1.2mm walls and above 20% infill is enough (actually the screws that carry the weight, not the plastic
I used a 15 mm distance from the wall or anything you mount on it, but the height can be scaled vertically (Z) without issue