1 / 6
BOBBLEHEAD JOSEF PRUSA
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
BOBBLEHEAD JOSEF PRUSA
- Rating
- 4 / 5
- Likes
- 19
- Downloads
- 81
- Makes
- 1
- Views
- 392
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Share Alike
- Made to work with the base and spring components from 3D Printy
PRINTING INSTRUCTIONS:
- MATERIAL : PLA
- NOZZLE SIZE : 0.4 mm
- LAYER HEIGHT: 0.2 mm
- VERTICAL SHELLS: 2
- INFILL: 5%
If you want to use the small spring I recommend using an infill not exceeding 5% while if you use the large spring you can use an infill of 15/20%
- it should be printed with supports (35 in supports settings is enought)
