Filament Hanger - Eliminate vibrations
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple filament hanger that reuses the spool arms you already have. Eliminates a host of vibrations.
- Rating
- 4 / 5
- Likes
- 7
- Downloads
- 46
- Makes
- 1
- Views
- 538
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
The stock filament holder is good enough to get you going, but it mounts on top of the printer, introducing all kinds of rocking and vibration as you print. This filament hanger replaces your current direct-mount filament holders and lets you position the filament above the printer without any of the transferred vibration that the original filament holder approach. Designed for enclosures.
Klipper users - you'll need to recalibrate after you switch filament holders and move away from the on-the-printer mounted filament spool holders. Lots of resonance and vibration will be eliminated just from this one change.
There are no arms - the socket accepts standard PRUSA filament holder bayonette, so you can just reuse whatever PRUSA compatible arms you are using.
Printing - designed for .2mm layers and recommend PETG. PLA will work but over time it will become fragile just from age. Support on build plate recommended - Snug supports separate very cleanly and easily.