Slickstick clip for molle attachment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A PALS compatible MOLLE clip for connecting pouches and textile containers.
- Rating
- 5 / 5
- Likes
- 73
- Downloads
- 217
- Makes
- 2
- Views
- 1,908
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
A two piece print (plus a little filament) to connect MOLLE/PALS compatible pouches and packs. Designed to slide on easily, stay on securely, and last indefinitely. Prints very well in PLA, though PETG will probably be even more durable.
For the larger piece, print with three walls, no infill, for resilience, and make sure you have your settings tuned to prevent warping. For the smaller piece, I recommend three walls, 60% gyroid infill.
Post-processing: Connect the two pieces by using about 1" of filament as a hinge. Depending on your printer, the holes may be a little tight, and you may want to ream them. The hinge can be thermally welded in place with an iron or by pressing against a hot nozzle.
If printed and assembled correctly, it should make a satisfying “snap” sound when connected to let you know it's secure.
Fully parametric and commented .scad files included for remixing.