Retractable Remote Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Retractable remote control holder that uses an old tape measure
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 22
- Makes
- 0
- Views
- 1,660
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial
My kids aren't going to remember to put a remote back in the holder; now they don't have to!
This build takes the spring from a tape measure. Be warned! these springs are not easy to work with and remove. I used a free tape measure from Harbor Freight.
The spring goes into the slit in the center post on the housing. There's a hole on either side for the string, depending on which way your spring rotates. I just used hot glue to attach the spool cap (to isolate the spring) and the housing top.
Use some Command strips to attach it where you want: on the wall, under the coffee table, or wherever!