Nerf Disruptor/Strongarm Plunger Tube Face
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement plunger tube face for the Nerf Disruptor and Strongarm.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 41
- Makes
- 0
- Views
- 758
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
If you damaged your plunger tube by removing the air restrictor or are having issues with the plunger over-inserting when using heavier springs this plunger tube head can help.
The tabs should lock in to the existing flanges on the plunger tube but you will want to use a glue like E6000 or Welder to get a good air seal. Use a 2mm EVA foam sheet to make a new gasket to make sure that the plunger tube face seals against the cylinder. Slight trimming/fitting may be required.
There is .step file as well so anyone can modify this part to their individual needs.