Magnetic or not Xbox Controller Stand/mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It can be used both on a desk and on a metal thanks to the magnets in the back. Also, i've cleaned the original file.
- Rating
- 4 / 5
- Likes
- 12
- Downloads
- 77
- Makes
- 4
- Views
- 685
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
UPDATE FOR DESK VERSION!
I've made a new version for whose won't use the magnetic feature, now it's a lot more stable, however, you can print it without supports only on the side!
The original design is not mine, I have made a new remix with the stand suitable for both magnetic and on planar surfaces (eg: ur desk), I have added a lip so the controllers can be more stable . Also, I've cleaned the file from some artifacts. Now, it is possible to print it directly with the "X" logo directly on the bed plate, if you have a less performing printer I suggest you print it on a side for a better chance of success.
I used 15x magnets (5 x 1.5 mm). If you have bigger magnets i think you won't need as much.
____________
Printed in PETG with 3 perimeters and 5% infill
0.20 layer height
since there are a lot of magnets sizes available if you have different magnets just tell me in the comments i will upload a custom version!