Prusa Mini Raspberry Pi Camera Mount - by Clip-Fastening
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.60 – €3.18 net (excluding VAT)
For file: GCode File / raspberry_camera_bracket_connector_015mm_pla_mi.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.89 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 3.38 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The mounting is done by clipping in the bracket and can be moved forward or backward if necessary ...
- Rating
- 4.841 / 5
- Likes
- 281
- Downloads
- 1,654
- Makes
- 31
- Views
- 12,214
- Reviews
- 44
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The mounting is done by clipping in the bracket and can be moved forward or backward if necessary ...
I thought I could print the bracket I had designed for the Prusa MK3s. It fits too, but very tight, so it is very difficult to move. Then I measured ... the aluminium extrusions of the Prusa Mini are almost 0.5mm wider than those of the Mk3s. So I changed the dimensions of the mount for the Mini.
Screws: M3x20 (amount depending on the number of extensions) and M3x25 (1x) plus nuts and washers
I recommend in any case to use washers, even if it is a little fiddly to install them. This will improve the mobility of the individual elements.
The camera case and the connector are a remix of
https://www.thingiverse.com/thing:3121052
The main reason why I decided to take this camera box was that the camera could be aligned even more precisely due to the ball head on the connecting piece and that the back front was for clipping.
Print instructions
Printer brand: Prusa
Printer: I3 MK3S
Rafts: Doesn't Matter
Supports: No
Resolution: 0.2
Infill: 20%
Filament brand: Prusa
Filament color: Galaxy Black
Filament material: PLA