Ender-2 Pro Raspberry Pi Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ender-2 Pro tool tray for Raspberry Pi 3/4 B+
- Rating
- 4.75 / 5
- Likes
- 45
- Downloads
- 177
- Makes
- 4
- Views
- 1,324
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Had the idea of storing my Raspberry Pi 3 B+ in the small tray that came with my Ender-2 Pro. I couldn't find any existing designs, so I created one using Fusion 360.
I wanted to be able to print this with no supports, so it was designed to be printed faceplate down without any supports. To achieve this, I had to separate the back walls from the main tray. The back panels slot in, though you might want to use a drop of crazy glue with light clamping pressure to secure it.
If you are printing this on an Ender-2 Pro, you will need to set the skirt loops to 0 to avoid going off the build plate.
I used 100% infill, though, I am sure it would work just fine with less than that as the whole model is mostly walls.
The fit is a bit snug, so you might want to sand down the sides a bit to make them smoother. I personally didn't do any post processing and put it in as is.
Edit 12/16/2022: I uploaded a modified version of the tray for use with a Raspberry Pi 4 B+; however, as I do not have one on hand, I am unable to test the fit. Overall, the two are very similar in dimension save for the placement of the USB/RJ45 ports on the front. If you decide to try it out, please feel free to let me know how it goes and I can make any corrections necessary.