1 / 5
Fountin Pen body for JOWO conklin monteverde nib unit — image 1
1 / 5

Fountin Pen body for JOWO conklin monteverde nib unit

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€1.12 – €1.37 net (excluding VAT)

For file: Body Jowo v6_0.25mm_PETG_MINI_1h27m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €1.25 excluding VAT (range midpoint).

Weight reported by the author
12 g
Print time reported by the author
1.46 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

A 3d printable housing for a JOWO nib unit. features a thread on cap with clip and threads on the back for posting.

Rating
0 / 5
Likes
13
Downloads
73
Makes
0
Views
876
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial

a fun project for printing your own fountain pen body. the nib and feed are a jowo nib unit designed for use with conklin or monteverde pens. I bought mine form goulet pens. 

This is not a remix but was heavily inspired by the Alma pen found here 

https://www.printables.com/model/127490-alma-fountain-pen-v4

Most notably the  threads the very front of the section. I found that did a much better job of keeping the nib wet than a 3d printed snap cap.

I wanted something slimmer however so I put together something different. The clip is an obvious weak point and I expect to glue it back together at some point. I also added and ink window, a feature I really appreciate on lamy pens. The threads on the back of the pen body allow you to cap the pen  securely as well.

you will need supports under the clip. 

I printed at 0.2mm. it works at that height but it would look better with finer layers. 

use a brim, I  uses s 7mm brim

This was a fun project and I'm excited to try it again with different nib units and more ambitious pen designs. 

Tags