Otto DIY build your own robot
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.52 – €1.86 net (excluding VAT)
For file: OttoDIYHead_0.28mm_PLA_MINI_1h28m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.69 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 1.46 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An interactive robot that anyone can make, program with Arduino or Blockly software, remote control and expandable.
- Rating
- 4.944 / 5
- Likes
- 816
- Downloads
- 30,076
- Makes
- 46
- Views
- 70,519
- Reviews
- 36
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
An interactive robot that anyone can make!
Otto walks, dances, makes sounds, avoids obstacles, you can code on your own and even customize, it is completely open source, Arduino compatible and 3D printable.
Features
💻 Programmable with Otto Blockly or Arduino IDE
👣 Walks & dances
🦇 Avoids obstacles
🔊 Makes emotional sounds and melodies
more details in https://www.ottodiy.com/
Print instructions
Otto is very well designed for 3D printing, so won't give you trouble if you follow these common parameters:
FDM 3D printer, PLA is enough.
No supports or rafts.
Resolution: 0.2mm
Fill density 15%
All parts in total use 100gr aprox. equivalent to 35m of regular PLA 1.75mm thickness, it should take around 4 hours to 3D print a full set of parts for one Otto even less with optimized settings depending on your printer and slicer.
List of Parts
🖥 Otto Nano Microcontroller + I/O board
🔌 USB cable
🔋 Rechargeable 16340 battery booster do NOT use Alkaline not enough power or use
Toggle or 8x8 push switch depending on the body your print
⚙ 4 x micro servo motors with set of screws.
🦇 Ultrasonic sensor HC-SR04
🔊 Buzzer passive Ø12mm
🌈 8x DuPont female to female jumper wires
Small Phillips screwdriver magnetized
3D Printed head
3D Printed body
3D Printed legs (2)
3D Printed feet (2)
How to build video
Expand into a Humanoid robot or Smart robot
or simply decorate with these robot face accessories
We invested lots of time and resources to provide open-source code, software, and hardware, please support this project by just following us, giving us a ❤ Like and share and you are welcome to be a part of this friendly community of robot builders, teachers, and makers.