Anycubic Vyper / Kobra Filament Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After top mounting my filament on the Anycubic Vyper, I noticed it would catch and snap back on the corner of the Z…
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 230
- Makes
- 3
- Views
- 1,241
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
After top mounting my filament on the Anycubic Vyper, I noticed it would catch and snap back on the corner of the Z axis bar. I designed a guide to top mount between the two top screws using a 3mm x 10mm screw using DaVinnci2000s nut to lock into the track: https://www.thingiverse.com/thing:3050607
Will work on Vyper, Kobra 1 and 2 series printers
Printed on Anycubic Vyper
Print Settings
Printer Brand:
Anycubic
Printer:
Anycubic Vyper
Rafts:
No
Supports:
No
Infill:
50%
Filament:
White
Notes:
Temps:
first layer: 205C
All other: 195C
Bed: 60C
Speed 70mm on perimeter
Layer Height: 3mm
0.4mm nozzle
50% infill is probably overkill.
Print time was 46 min
Category: 3D Printer Accessories