1 / 2
24 Inch Roll Paper Spool Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My makerspace salvaged an HP Designjet 500 plotter that came with no accessories.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 84
- Makes
- 0
- Views
- 681
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
My makerspace salvaged an HP Designjet 500 plotter that came with no accessories.
Ordering a 24" roll of paper to test it with, we needed some way of feeding the roll into the printer.
You'll need two of these per roll, and a suitable bar to go through the middle.
The inner diameter is 10mm, and a bit of a tight push.
If you need a different diameter, leave a comment and I'll see how large I can go.
Print instructions
Printed in PLA with the default 0.3mm DRAFT profile with the following tweaks;
- 4 perimeters
- Cubic Infill @ 20%