EVA 2.4 for Hypercube BLV Fusion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Great design Hypercube BLV fusion by EdNiedziejko allow me to reuse my 10mm rods on Y and have the benefics of using…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 64
- Makes
- 0
- Views
- 533
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Great design Hypercube BLV fusion by EdNiedziejko allow me to reuse my 10mm rods on Y and have the benefics of using mgn15 on X.
However with this design I never able to property tight the belts, you need to manually tigth the belts and its not a accuracy process. I've find an EVA 2.4 convert to BLV cube however due the fact that route path its different on hypercube, left side motor runs on top and rigth side runs lower on belt path its not suitable for this hypercube mod.
So I mirror the parts on EVA conversion to fit belt path of hypercube on universal face (front part) and back corexy part. With EVA beside you can tight the belt very easy you've access to all EVA 2.4 ecosystem with hotends and drivers. For belt clamp you also need to have the theet reversed to follow the belt from original hypercube I added the remix for this.
The generic parts for these conversation are:
- 1x blv-ngm-cube-universal_face_hypercube.stl
- 1x blv-mgn-cube-back_corexy_hypercube.stl
- 1x blv-mgn-cube-tension_slider_6mm_right.stl
- 1x blv-mgn-cube-tension_slider_6mm_left.stl
- 2x blv-mgn-cube-face_belt_grabber.stl
All the other parts you need to grab from EVA 2.4 page https://2.eva-3d.page/.
I'm also uploading the parts for my configurations v6 and sherpa-mini top plate.
I hope it's useful
Category: 3D Printer Parts