Vacuum Bed Riser Battle Kit
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.88 – €1.07 net (excluding VAT)
For file: KID_Bed_riser_hiding_cut_0.2mm_PLA_MK3S_1h2m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.97 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 1.03 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I want the vacuum robot to be able to go below the kid's bed, so here is my solution:
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 24
- Makes
- 0
- Views
- 929
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Standard Digital File License
⚒ No 3D printer? No time to source components?
I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙.
📦 Shipping across the EU: 👉 Get it at NautilusForge.shop
I want the vacuum robot to be able to go below the kid's bed.
So here is my solution:
Rising the bed by 27mm with the 3D feets + couple of millimeters from the felt patch
feet are designed for a 60mm x 40mm rectangular wooden feet (see pictures)
Felt diameter needs to be D35mm or below
Cutting about 25mm of wood on one of the side of the bed with a jigsaw and then hiding my crime with a custom piece.
That give an additional ~5 cm to the robot to go below the bed, given that the original feet where about 5cm too.
Most robot are about 10cm high. I have a roborock (see picture)
Print:
Advice: Make the feet strong !
Assemble:
Screw the feet in place with a wood screw (length 30mm or more - Diam 5mm or below)
Stick the felt below the feet (D35mm felt of below)
Seems a bit specific but I hope it helps someone !