Stocking Hanger Clips - low profile
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.15 – €1.40 net (excluding VAT)
For file: stocking clip_x4_0.2mm_PETG_MK3_1h25m_MatthewGTaylor.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.27 excluding VAT (range midpoint).
- Weight reported by the author
- 14 g
- Print time reported by the author
- 1.41 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Use these small clips to hang your stockings under a ledge with minimal hardware and clutter.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 35
- Makes
- 0
- Views
- 339
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print Recommendations | Print standing on one of the angled edges for best results.
Installation | Sized for Small 3M Command Strips, cut the pull tabs very short for the least visibility. I typically clean the surface of the printed part with isopropyl alcohol and dry it well before attaching. Otherwise follow the directions on the Command Strips package.
Weight limit of the adhesive strips in this loading orientation is limited. We use these to display our empty stockings before Christmas, they're plenty strong for that. Once they're loaded with goodies we typically take them down and lay the on the hearth.
They are hardly noticeable so we leave them up the whole year, no need to remove and reinstall.
Designed in AutoDesk Fusion360.
Hope you find it useful. Pictures are appreciated!