FLSUN V400 Enclosure (Cut PLA version)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosure for V400 cut version printable on the V400 or other small printer
- Rating
- 4.9 / 5
- Likes
- 120
- Downloads
- 1,059
- Makes
- 7
- Views
- 5,987
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Enclosure for FLSUN V400.
You will need:
- 2 polycarbonate panels 403x790x1.5mm (thickness up to 2mm but I used 1.5mm easier to bend)
- 16 CHC M3x10mm screws
-16 M3 stop nuts
Door at this link :
https://cults3d.com/fr/mod%C3%A8le-3d/divers/flsun-v400-enclosure-cut-version
Printing without support, flat face against the bed.
UPDATE! : I modified the bottom left side (Power Supply), the dimensions were not good. Thank you FABMNAT!
UPDATE 2 : I added two "Nuts holder" files in case the screws are not in front of the holes (depends on the printer settings...).