Lathe Chuck Key Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.69 – €2.07 net (excluding VAT)
For file: chuckkeyholder_02mm_pla_mk3s_2h3m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.88 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 2.05 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This chuck key holder for my Central Machinery Model 45861 9x20 Lathe is based on an original design by "Clough42"…
- Rating
- 0 / 5
- Likes
- 50
- Downloads
- 344
- Makes
- 1
- Views
- 1,943
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
This chuck key holder for my Central Machinery Model 45861 9x20 Lathe is based on an original design by "Clough42" (available here : https://www.thingiverse.com/thing:4392251 ). That design was made for a different model lathe, so I recreated the design with some minor modifications to make a version to fit my lathe. Included in the photos is a drawing showing the relevant critical dimensions so you can see if this will fit your lathe.
Two versions of the holder are provided. The first and simpler version fits a bit loosely, so it slid back and forth a bit more than I liked. The second version (which takes a bit longer to print) has an integral spring clip to make it fit more tightly.
The OnShape 3D CAD files for this are available here:
Print instructions
I printed in PLA; use the 3mf files provided. Otherwise:
- print top side down
- no support required
- 10% rectilinear infill