Dolce Gusto Capsule Holder (Nescafe)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modular capsule holder that can be fixed to a wall. Designed to hold Nescafé Dolce Gusto capsules.
- Rating
- 4.833 / 5
- Likes
- 136
- Downloads
- 853
- Makes
- 18
- Views
- 7,413
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Modular
The cupholder is modular and you can stack the module vertically as high as you want. To have a nice finish there is a top that you can optionally add.
Installation
The system is not fixated by itself, and is meant to be fixed to a wall through the holes added in the back. M3.5 works like a charm. I recommend fixating the top and bottom most modules, and if you have a lot of them, add a screw every ~10 modules.
Printing
I have printed mine in Prusa Galaxy Black Prusament PLA. I used PrusaSlicer and made the gcodes on the 0.20mm SPEED setting with 10% infill. I used a I3 MK3S+ with a 0.4mm hardened steel nozzle.
Attribution
This model was made by FabriceVN over at cults3D.com. I liked the model and couldn't find a decent modular system on printables, and their license allowed for it to be shared with attribution.