Hotend 4020 Fan Adapter for Biqu H2 and M.A.D. system
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
4020 Axial fan adapter for the H2 to match the aesthetics of the M.A.D. system
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 152
- Makes
- 1
- Views
- 1,021
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a 4020 adapter to use my Noctua fans with my Biqu H2 V2S Revo, but I also wanted it to look like it matched the aesthetics of the rest of the M.A.D. system. I also designed it to try and eliminate any airflow from getting down to the nozzle for when I am printing with ASA and ABS, so it is positioned to try and address that.
I printed my own mounting plate for the H2 to work with the linear rail carriage on my machine, so I cannot guarantee this adapter will work with your setup, but if you have a few mm of space between your extruder and carriage plate, you should be good.
Fan mounting holes are sized to work with heat set threaded inserts like the rest of the M.A.D. system, however the lower left hole is intended to be left clear, and just use an M3x40mm bolt through the fan, adapter, and into the original fan mounting hole. The upper right insert is intended to be installed from the back for clearance of the stock mount bolt head, just use an M3x30 bolt for that one for the extra depth. I will try to remember to get pictures of how mine is set up so that it is a little clearer.
Printed with the H2 on an Ender 3 V2 at 0.16mm layer height, 0.4mm nozzle with black PolyLite ASA. Nozzle temp of 265, bed temp of 65, no enclosure, just threw a blanket over the machine. Laid Kapton tape down onto my build plate, and printed the part with the back on the build plate (the side that faces the extruder), used supports to make it all work. Printed nice and clean. My H2 isn't fully dialed in yet, so I printed pretty slow, around 40mm/sec or so.