1 / 1
PowerPole connector for QCX mini
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The QCX mini has a barrel connector for power. This print allows to use a PowerPole connector to connect a power source.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 26
- Makes
- 0
- Views
- 424
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Connect your PowerPole cables directly to the QCX mini!
Additional material required:
- A barrel connector like this one:
- 4 M2.5 screws 16mm
- A few centimeters of insulated wires
- A pair of PowerPole connectors (2 housings, 2 contacts)
After printing the housing of this connector, solder the red PowerPole connector to the center pin of the barrel connector and the black one to the sleeve contact.
Insert the assembly, remove screws from QCX mini and fix the connector to the QCX mini's enclosure using the four M2.5 screws.