1 / 4
Lulzbot Taz Dual Extruder V2 Redesign
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Helps prevent heat creep
- Rating
- 4 / 5
- Likes
- 14
- Downloads
- 75
- Makes
- 1
- Views
- 769
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a redesign of the v2 dual extruder to place the nozzles closer together and also resolves heat creep on the v2
Please note you will need a strong fan for the hotend. I used this one AFB0424SHB Delta Electronics | Fans, Thermal Management | DigiKey
Use the original heatset inserts and these inserts
Firmware files are found in /basefolder/Marlin-2.1x/.pio/build/rambo/xxxxxxx firmware.hex