Painter's Pole Outdoor Radome/Enclosure for RTL-SDR
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Get your RTL-SDR dongle away from your noisy computer and put it outside where it belongs!
- Rating
- 0 / 5
- Likes
- 57
- Downloads
- 144
- Makes
- 0
- Views
- 2,212
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I wanted to get my SDR dongle away from the computer and outside the RV for cleaner reception. This will allow up to 30' of separation with a standard male - male USB cable. You might be able to find longer, but I'm not sure what the standard allows. 30 feet or 10 meters is enough to go out a window and up over the roof line of a standard home. I use a telescoping painter's pole with a standard thread that is designed for light maintenance like cleaning, painting and changing hard to reach bulbs in auditorium ceilings.
It also accommodates a common USB bulkhead connecter I picked up off Amazon. You can find one with a different configuration with a little bit of searching for ‘USB Bulkhead connector’ The hole should fit, but might take some modification. I also ‘paint’ my outdoor prints with whatever decent Clear UV spray coat I can find. Krylon will do. I have PLA prints holding up for 5+ years now outdoors. I expect even better performance from the new PLA+ filaments. Obviously, you'll want to print in white if you don't want to bake your dongle.