1 / 3
E3DBuggy Honeycomb
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Public Domain
I used only Honeycomb filler for printing. The orientation of the printout when printing should be placed on the mat with the flat side. It is intended for printing without supports. We print with a layer height of 0.2 and a nozzle of 0.4 and with 100% fill and 2 perimeter. I used gold filament in the picture.