Juwel Aquarium-Türbeschlag für Glanz-Furniere / Juwel aquarium door fitting for glossy veneers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Türöffner für JUWEL Glanzfurniere ohne Fingerabdrücke hinterlassen. / Door opener for JUWEL gloss veneers.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 55
- Makes
- 0
- Views
- 1,001
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial
Standardmäßig sind in JUWEL-Aquarien-Möbel Push to Open – Türöffner verbaut. Der Nachteil bei Glanz-Funiere sind Fingerabdrücke, man muss oft nach wischen.
Dieses kleine Türöffner-Tool ist relativ schnell gedruckt und kann ohne Schrauben angebracht und wieder entfernt werden. Bei jedem öffnen und schließen der Türen entstehen Geräusche, gerade die Push to Open – Türöffner hört man unweigerlich ein nerviges Klicken. Dieses ist bei diesem Tool nicht hörbar, probieren Sie es selbst aus, wichtig ist das die Push to Open – Türöffner geschlossen bleibt ( siehe Bild mit zwei ** ).
- Ihre Türfront müsste ca. 16mm Breite (/Durchmesser) haben.
- unterschiedliche Größen für Finger liegen bei, auf den Fotos ist die Größere zu sehen.
- Druckzeit gering ohne Supportmaterial.
- Zum befestigen nahm ich doppelseitiges Klebeband.
Auf diesen Fotos ist der Schrank „Juwel-RIO 240 Liter“ zusehen, müsste auch an andere Schränke von Juwel funktionieren (16mm Durchmesser Front-Tür).
Viel Spaß mit diesem kleine Tool, Ihre Fische werden es Ihnen danken ;)
-----------------------------------.
english:
By default, Juwel aquarium furniture comes with push to open door openers installed. The disadvantage of gloss veneers are fingerprints, you have to wipe often.
This small door opener tool is relatively easy to print and can be attached and removed without screws. Every time the doors are opened and closed, noises are generated, and you inevitably hear the Push to Open door opener an annoying click. This is not audible with this tool, try it yourself, It is important that the Push to Open door opener remains closed ( see image with two ** ).
- Your door front should be approx. 16mm wide (/diameter).
- 2 different sizes for fingers are included, the larger one is shown in the photos.
- Printing time low without support material.
- I used double sided tape to attach.
The "Juwel-RIO 240 liter" cabinet can be seen in these photos, it should also be on other Juwel cabinets will work (16mm diameter).
Have fun with this little tool, your fish will thank you ;)