1 / 3
6min MK3S+ Pin-Support Challenge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My modified g-code for the Prusa MK3S+ for the Pin-Support Challenge by fullcontrol.xyz
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 902
- Makes
- 14
- Views
- 3,741
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
It is not my own design it is the Pin-Support Challenge by fullcontrol.xyz.
Only g-code.
I modified the start g-code to be the standart prime line and the end g-code to move the bed a bit. The most differece makes the speed increase up to 450% to reduce printtime. It took a few test to get the right settings. I also manually added the remaining time to be shown on the LCD.
Printer
- stock Prusa MK3S+
- 0.4 mm Nozzle
- 200°C nozzle temperature
- 60°C bed temperature
- Prusament PLA Galaxy Purple