Slim Raspberry Pi Zero W Case
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.72 – €2.10 net (excluding VAT)
For file: g.code für das "Rasberry Pi Zero W" Case für den Prusa Mini mit PLA / pizero_w-1_02mm_pla_mini_2h0m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.91 excluding VAT (range midpoint).
- Weight reported by the author
- 22 g
- Print time reported by the author
- 2 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Slim Raspberry Pi Zero W case, with / without screws, no pin header.
- Rating
- 4.852 / 5
- Likes
- 1,062
- Downloads
- 8,704
- Makes
- 67
- Views
- 40,851
- Reviews
- 61
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
24.05.2021 update:
- case was designed for the raspberry pi zero W, it will not fit the older raspberry pi zero (different SMD board layout).
- a remixed version that will fit the old pi zero and also adds cut outs for the pin header can be found here: https://www.thingiverse.com/thing:4806207
Slim Raspberry Pi Zero W case, with / without screws, no pin header.
I recommend using the screws bottom version because, even though the 3d printed one works, due to being a very tight fit, it will break when taking apart the case to remove the pi.
See pictures for more details!
Print instructions
check the .3mf file