Waveshare 7.5" screen and Rasberry Pi case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A snap-fit case for a Waveshare 7.5" screen, with pegs to hold a PI
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 101
- Makes
- 1
- Views
- 1,150
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
I built a very slow movie player and I built my own snap-fit case. It features a perfectly-sized window for the display, with slide in holding mechanism for it, a 10 degree tilt up, pegs to fit a raspberry pi 4, and a cutout for power.
When printing I added a modifer part that removed the top and bottom layers for a couple of boxes and used a hex infill to create 2 an un-modeled air vents on the bottom. If you do this, I recommend adjusting top/bottom height to leave 1 layer of infill that covers the whole bottom. Otherwise the vents will be rather weak.
To prevent corners lifting up, consider a disc on each corner.