ESCAPE keycap for Cherry MX type switches
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.26 – €0.32 net (excluding VAT)
For file: esc_key_mx_color_change_015mm_pla_mini_25m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.29 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 25.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An OEM profile keycap that clearly marks an exit.
- Rating
- 5 / 5
- Likes
- 249
- Downloads
- 1,620
- Makes
- 12
- Views
- 5,970
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
An OEM profile keycap that clearly marks an exit.**
Keycap base model from another designer on Thingiverse, check them out here: https://www.thingiverse.com/thing:2783650
**Not just for Semiologists!
Print instructions
80% infill
4 shells
Supports enforced up until 1.5 mm (to hold the integrated supports)
Optional: filament change at 9.50 mm for a two-colored keycap with a clear sign (best way to make it!)
After printing: cut the 6 support posts from the keycap and clear any stringing. Sand if desired.