Filament Samples + Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple filament sample design with two rack types (standing and hanging).
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 128
- Makes
- 0
- Views
- 1,197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
General:
This is a Filament-Sample design which can be used to gauge the look of filaments. The samples can be stored in two provided types of Filament-Racks (standing or hanging).
Samples:
Each Sample has the filament type displayed in the top left, as well as a place for a 12mm (or 1/2in) label with the filament's name on the top right.
At the bottom there are 6 cutouts, allowing to judge how "transparent" a filament is. The thickness increases from left to right: 0.4mm, 0.8mm, 1.2mm, 1.6mm, 2.0mm, 2.4mm
Additionally there is plenty of space to allow for addional markings, such as prefered print settings that can be added by either a labelmaker or a sharpie.
The dimensions of the sample are 85x54x3mm and approx. 11g of filament is required.
The following filament type labels exist currently: PLA, PETG, ABS, TPU, PETT, PA, PC
Racks:
The Filament-Racks can be used to store the Samples. There are two types provided: Standing (flat on a surface) or hanging (on a screw/nail with 2-5mm diameter).
For both types there are two capacities: 10 or 20 Samples.
Print Settings:
Printing - Samples:
Layer height: 0.2mm
Infill: 10% - Rectilinear
Top & Bottom Surface: Monotonic Linear
Printing - Racks:
Layer height: 0.2mm
Infill: 10% - Rectilinear
Top & Bottom Surface: Monotonic Linear
Supports: Off