Water cooling jacket for 107mm brushless motor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Water cooling jacket for brushless motors with 107mm outer diameter and
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 160
- Makes
- 0
- Views
- 1,256
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Water cooling jacket for brushless electric motors with 107mm outer case diameter and at minimum around 150mm case length. (130mm needs to be smooth to accommodate the o-rings)
It has 3 split rings inside that force the water to spread out around the diameter, so you don't end up with water flow just between the openings along one side.
You will need two ¼" BSPP threaded hose couplings, I used ones with an 8mm barbed fitting.
You also need two imperial O-rings in the size 107.54 ID x 3.53mm Thickness.
I bought these: https://www.remlagret.se/products/107-54x3-53-mm-o-ring-nbr-70-svart
A US supplier is: https://www.mcmaster.com/9452K194