1 / 3
Pokemon Poke Ball Toothpaste or Tube Roller Squeezer Stand for Kids — image 1
1 / 3

Pokemon Poke Ball Toothpaste or Tube Roller Squeezer Stand for Kids

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A cute Pokemon themed toothpaste or tube roller, squeezer, and stand in one to keep your bathroom sink neat!

Rating
5 / 5
Likes
21
Downloads
126
Makes
1
Views
883
Reviews
1

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution — Noncommercial — Share Alike

PRINTING TIPS:

  • These are oriented to print, so I recommend printing with the existing orientation.
  • Support settings for the base should be 65 degree overhang angle with supports touching build plate only. This will put supports only on the bottom of the base under the arched area. If you can use tree supports, you can use 45-60 degree overhang angle.
  • The key is printable with no supports, so you should turn off supports for the key.
  • I recommend at least 20% infill for the base and 100% infill for the key.
  • For adhesion, use skirt for base and brim for key. I recommend using tape for the key.
  • You may have to file the key slit open a bit at the end touching the build plate.

HOW TO USE:

  1. Slide the bottom edge of your tube into the key slit.
  2. Insert the tube with key into the base.
  3. Turn the key to roll up and squeeze your tube! DO NOT OVERTIGHTEN!
  4. It will now stand on its own.

Tags