1 / 3
20 Sharpie Permanent Markers holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simply designed Sharpie marker holder. Scroll down for more info.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 104
- Makes
- 0
- Views
- 482
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
There are two parts of the Sharpie holder, which 20_Sharpie_holder is a base and 20_Sharpie_holder_pad is just a decoration - it is not necessary to print.
Hole diameter = 13 mm / 0.51 in
- No supports
- No glue
- 15% Lightning infill is sufficient, but with at least 3 perimeters
- PLA or whatever
- Textured steel sheet is recommended - looks cool
Don't forget to share your color/material variants ;)
Tip: In PrusaSlicer, arrange the model with the top surface (side with the holes for markers) laying on the print area. See the picture.