Ornate Office Sign
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a fun project to create a door sign for a home office. Designed to be two-color printed with filament switching.
- Rating
- 5 / 5
- Likes
- 68
- Downloads
- 267
- Makes
- 0
- Views
- 969
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Public Domain
Just a fun project to create a door sign for a home office. Designed to be two-color printed with filament switching. Mount it on a door or wall with double-sided tape.
The OnShape 3D CAD file for this is located here:
Print instructions
Print in PLA. This could be printed in a single color, but two colors look much better. The provided 3mf file is set up for two colors (I used blue and gold, but of course choose any two colors you like).
If you are setting this up on your own, you will likely need to scale it down and rotate it to get it to fit the print bed. Print with 100% infill (which it will probably do anyway regardless of the infill setting).
This is a large flat object so it is a bit tricky to print. You will need good bed adhesion to make sure you do not get curling at the edges. I printed on a smooth plate (which I made sure to clean well first), and reduced the Z-height setting a bit (after a first failed print) to make sure the first layer sticks well.