1 / 4
osVAC compact 90degree bend with slip ring, no supports needed
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
90 degree bend for osVAC. Print in two pieces without support, easy assembly.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 75
- Makes
- 0
- Views
- 468
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
90 degree bend for osVAC. Print both parts as shown in the screenshot. The female connector with the slip ring should rotate freely right after printing without any problems.
Assemble both pieces, should be a tight fit. I secured the parts with a drop of super glue.
The female adapter uses my osVAC leak tight modification. You can add a 37x32x2.5mm O-ring to achieve an air tight fit, a really cheap one will do. Without O-ring, it will work as any other osVAC connector.
Printed in PETG with 0.15mm layer height.
Category: Tools