Tracksaw Square for Makita & Festool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A quick and dirty tracksaw square for Makita and Festool Tracks. Prints as a one piece.
- Rating
- 4.95 / 5
- Likes
- 689
- Downloads
- 4,469
- Makes
- 27
- Views
- 18,343
- Reviews
- 20
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
A track saw square for the Festool Track. Installed with dovetail interface and no moving parts. The square has fairly tight tolerance and the dimensions are based on the three tracks I have access to. I do not know if this will be universal. The installation and removal requires fair amount of persuasion so make sure you don't have any burs or nicks on the track that could cause binding.
The longest side of the part is 300mm/245mm/200mm long. I tested this print on my Prusa MK3s with no skirt. I aligned the long edge to the X-axis for fitment and accuracy. When printing I would recommend not printing at an angle to minimize error due to x and y-axis having to move simultaneously. [I don't know this for sure. It seemed logical.]
Only the top dovetail section requires overhang support. I have added +0.25mm tolerance in the design to minimize the effect of filament sag for bridging.
Any thoughts or comment on improving appreciated! Thanks!
If the print has the elephant's foot that has to be sanded down with a block sander.