ADS-B receiver case for Raspberry Pi 4B + RTL-SDR + filter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A compact, unobstrusive case for an ADS-B receiver.
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 206
- Makes
- 1
- Views
- 3,516
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This fits:
– a Raspberry Pi 4B
– a Nooelec RTL-SDR v5 (or similar)
– a generic 1090 or 978 MHz filter module + SMA adapter
Hardware needed:
– 6 x M3 x 10mm screws (can be longer) for the lid
– 4 x M2.5 or M3 * 5mm screws for mounting the Pi (I used nylon screws)
It's a bit large but should fit most printers (maybe diagonally).
I‘ve cut the printed threads with a M3 tap.
Passive cooling works reasonably well with a heatsink. Make sure to orient it correctly, fins vertical (my photo shows it wrong ;).
Update
Cyclone-6 made a customizable OpenSCAD version of the design: https://www.printables.com/en/model/979301-reverse-engineered-ads-b-case-for-openscad