Laundry Sink Lint Trap / Filter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a laundry sink lint filter for laundry sinks with a 1.54" drain. The filter body is 150mm tall with a diameter…
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 101
- Makes
- 0
- Views
- 798
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
This is a laundry sink lint filter for laundry sinks with a 1.54" drain.
- The filter body is 150mm tall with a diameter of 100mm.
- The drain insert is 1.54"/39.1mm in diameter and 24mm high.
It is designed such if the water level gets too high, it just flows over the top.
I printed it with a 0.4mm nozzle and 0.2 layer height. Print with the 1.5" drain adapter on the bottom.
Revisions:
- v7 Initial Revision
- v10 Add channels to base to allow drainage
- v11 Add vertical channels as well
- v13 Fewer channels
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
Yes
Notes:
Be sure to add supports from the print bed.
Make sure you limit supports to only from the bed - there are some tiny overhangs in the grid that might trigger supports. They should not be required.
Category: Household