LackTable Whiteboard Eraser & Holster
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.74 – €2.13 net (excluding VAT)
For file: holster_02mm_petg_mk3s_2h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.93 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 2.2 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I have an SD card holder which holds the queue of my next print jobs (model here…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 331
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I have an SD card holder which holds the queue of my next print jobs (model here https://www.prusaprinters.org/prints/31652-sd-card-holder).
I mark the enclosure door with the SD card contents (Lack marker holder here https://www.prusaprinters.org/prints/32754-lack-table-dry-wipe-marker-holder)
I use my dry wipe marker to write on the lack table door what print file is in each of my SD cards. As I progress through these and add more (when I'm busy), I wipe the old writing off.
I couldn't find a suitable solution for this need that exactly fit my purpose so I designed a new one.
The holster is 50mm wide so fits nicely on the Lack legs. I fold over a piece of toilet paper and hold it on with an elastic band.
This works surprisingly well.
When a print is complete I wipe it off (Lack eraser here https://www.prusaprinters.org/prints/32753-lacktable-whiteboard-eraser-holster)
Print instructions
Print the holster upright on the bed, no supports.
Print the eraser with the 'wipe side' on the bed, use support on build plate only.
I reckon you could get away with any material, any layer height and any infill density.
This not a challenging print.
Let me know if you like it.