1 / 5
Porous bottle for Silica Gel Desiccant Beads — image 1
1 / 5

Porous bottle for Silica Gel Desiccant Beads

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Screw top bottle for silica gel desiccant beads. Easy print with minimal travel moves. Store with dried filament.

Rating
4.667 / 5
Likes
24
Downloads
165
Makes
7
Views
811
Reviews
6

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Public Domain

I've printed silica gel containers in the past but wanted something to fit in the core of a filament roll to store with dried filament in a vacuum bag.

I also wanted something easy to print without hundreds of small travel moves jumping from one pillar to the next in a typical porous container grid.

So here is a design with pores in the same plane as each layer (XY) which makes printing easy and fast. Container has a screw cap to allow easy bead removal and refilling when the beads need to be regenerated. (I guess technically, if printed in a high temperature material or regenerated at a lower temperature for a longer time, there would be no need to empty them.)

Maximum pore size is about 1 mm so it should suit a lot of typical silica gel desiccant beads. When using, once full, turn the container upside down and shake to allow the small dross to escape from the container.

Model wall thickness is about 0.8 mm all over.

Printed with 0.44 mm extrusion width, 3 walls, 80 mm/s (75% outer wall), 0.16 mm layer height. Could easily print with 0.2 mm layer height and retain thread detail. Supports are not required for the threads.

Printed in clear PLA so that any change in colour of the beads can be seen without opening the container.

Tags