Prusa Mini Sheet Storage - Behind LCD support
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.20 – €0.25 net (excluding VAT)
For file: mini-sheet-hanger_90deg_025mm_pla_mini_19m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.22 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 18.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Super quick and dirty - I took Evolution80's original model and rotated it in Blender 90 degrees so the 3030 mount and…
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 97
- Makes
- 1
- Views
- 843
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Super quick and dirty - I took Evolution80's original model and rotated it in Blender 90 degrees so the 3030 mount and the sheet holder are now parallel with each other. It works as support for the unsupported end of the sheet, and as a stopper to prevent the sheet from being pushed in too far.
Print instructions
0.25 draft settings are fine.