1 / 2
Positioning guide for Atomstack S10 Pro and Sculpfun honeycomb cutting mat (400x400)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use this to position your honeycomb cutting mat to the real (0;0) point with Atomstack S10 Pro laser-engraver/cutter
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 282
- Makes
- 1
- Views
- 2,002
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a remix to use a 400x400 honeycomb cutting board from Sculpfun with the Atomstack S10 Pro to position your material at the real origo point. Had to edit the offset to fit the frame of the honeycomb. Now it is snap-fit to the honeycomb AND the left front leg of the cutter. Only thing you have to adjust manually is the far end Y-axis offset.
Leave a comment if you have any suggestions, or just like it.