1 / 3
Replacement Gear for 210 Series DC Motor (Kodiak Sidewinder / RV Step) — image 1
1 / 3

Replacement Gear for 210 Series DC Motor (Kodiak Sidewinder / RV Step)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

70 tooth Replacement Gear for a Kodiak Sidewinder or other RV Step 210-1009, 210-1010, 210-1011, 210-1012

Rating
0 / 5
Likes
6
Downloads
33
Makes
0
Views
705
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Share Alike

Should Fit Part Numbers 210-1009, 210-1010, 210-1011, 210-1012. Replacement Plastic Gear for the Motor.

PolyGear was used to create the gear teeth which worked much better than the other gear libraries as it allowed me to set backlash easily.

If you are downloading to modify, make sure to put the PolyGear folder adjacent to gear.scad so it can import the library. 

Print Settings

  • Material: PolyMaker CoPA Nylon
  • Infill: 40% or higher
  • Nozzle: 0.2 Nozzle HIGHLY recommended (see pictures for comparison), 0.6 caused the teeth to become less defined and would strip after minor usage, 0.4 worked for a few months but suffered the same.
  • Supports: Touching buildplate, HIGHLY recommend using organic supports if your slicer supports it, especially if printing with Nylon. If printing with a 0.2 nozzle the supports remove much easier than they do with a 0.4 or 0.6.
  • Orientation:
     

 

Video of initial test during install

Video of Operation

Tags