HP ProBook 450 G6 - 2.5" SATA frame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
No screws mounting frame for 2.5" SATA disc in the HP PB 450 G6 model.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 60
- Makes
- 0
- Views
- 334
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple spacer frame for mounting 2.5" SATA disc in the discbay of a HP ProBook 450 G6 (probably even the G7 model) without using any screws. Slips over the SATA disc and uses small nubbs that go into the holes for the screws to secure the disc, the frame then locks into the slots of the drivebay to give it a fairly tight fit. The frame only matches in one orientation so keep an eye on the tabs, the L shaped tab goes on the ‘backside’.
Print-time aproximately 15 minutes on my Mini using PETG at 0.25mm layer height. No need for support .
Model-file in Autodesk Fusion 360 included.