Large Earth Globe Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.43 – €4.19 net (excluding VAT)
For file: Ikea Lightbulb Socket for E12 Lightbulb V4_0.2mm_PLA_MINI_3h54m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.81 excluding VAT (range midpoint).
- Weight reported by the author
- 46 g
- Print time reported by the author
- 3.89 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A large globe lamp that uses a plug-in outlet cord and a LED chandelier bulb
- Rating
- 5 / 5
- Likes
- 257
- Downloads
- 2,007
- Makes
- 9
- Views
- 8,843
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a large 205mm diameter globe lamp that uses NASA imagery to create an accurate depiction of the continents and oceans. The oceans have some added artwork including a compass rose and pirate ship for some added flair. There are two versions - one with a bottom mount intended to be displayed on a wire frame cube stand, and a top mount intended to be hung from the ceiling. For the ceiling mount version the Cable Wall Clip can be used to mount the power cable along the ceiling.
The lamp is designed to use an IKEA Stralla lightbulb cord and a LED E12 Chandelier lightbulb. I use these ones from Amazon that are fully dimmable if paired with a smart outlet.
All GCODE files provided use a 0.6mm nozzle and 0.2mm layer height for efficient printing times. You can use a 0.4mm nozzle and 0.15-0.2mm layer heights but expect longer printing times.
The globe lamp must be printed at 100% infill, and the Lightbulb Socket must be printed with sufficient perimeters (4-5) such that there are no infill sections.
The wireframe cube holder must be printed 3 times, and the pieces are simply superglued together.