1 / 2
Voron0.1 DropEffect XG Fanless Toolhead Mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bowden setup for DropEffect XG Fanless Toolhead
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 15
- Makes
- 0
- Views
- 1,035
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
Inspired by 247printing
Main idea of this mod is to make toolhead as light as possible so this is bowden fanless setup. Unfortunately I was unable to tune DropEffect XG for more than 18mm^3/s flow rate so not sure how reasonable is this setup.
BOM
- 4x 4028 fans
- 18x M3 heatsink insets
- 16x M3x15 bolts
- 4x M3x12 bolts
- 2x M3x18 bolts
- *1x 24v → 12v converter
*My controller board is 24v, but fans are 12v so I need converter.