Atari 7800 Modular cartridge Display stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular Display stand that you can expand to however many carts (and space) you have.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 38
- Makes
- 0
- Views
- 308
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
Files to Print
Required
Print the appropriate files named "[region]_Display_Bottom" for the cartridges you want to display.
Then for each additional cart, you can print the files named "[region]_Extension_Cartpiece", and simply screw them on the previous one(s).
Additional
You won't need to print supports for every cartpiece, but I highly suggest doing it every other 2 to 3 pieces.
You can find "Extension_SupportConnector_25mm" and "Extension_SupportConnector_50mm", and they are meant to create whichever height you require, simply by screwing them together.
(note, depending on how tall people go with this, I may add more height variants in the future - just send me a message if you are in need of this!)
Optional
If you go in height too far, and notice the support structures become too "wobbly", you can print the "Extension_BaseConnector" pieces.
These slide into the holes for the support structures linking them together and stopping sideway movement.
Hardware
Required to connect cart pieces together:
2x M3 * 15/20mm
2x M3 square nut
Required to connect support connectors together:
2x M3 * 5/8mm
2x M3 square nut
(one for each side)
Other Prints
These are all the other variants available:
Atari 2600: [Printables Link]
Atari 7800: [Printables Link]
SEGA Master System: [Printables Link]
SEGA MegaDrive/Genesis: [Printables Link]
Nintendo 64: [Printables Link]
Super Nintendo/Famicom: [Printables Link]