1 / 1
Twisted Ornament with extra structure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Twisted ornament by NormakeR with structure added to allow it to print more easily.
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 53
- Makes
- 1
- Views
- 222
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I added some internal structure under the top cap to keep it together while printing. It's probably more than was needed, but does not seem to show much from the outside.
Print it as shown in the photo (upside down).
Print Settings:
MatterHackers Quantum PLA (PrusaSlicer Generic PLA with temps raised 5 deg)
.4 mm nozzle
.2 mm layer height
Slowed the print speeds down to half from defaults in PrusaSlicer
Supports to build plate only
Brim
15% infill
Prusa Satin Sheet (models pop off way easier than on their PEI sheet)