PS/2 Cover for Soarer's Converter Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.49 – €0.60 net (excluding VAT)
For file: Converter_ps2_0.2mm_PLA_MK3S_38m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.55 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 38.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a simple PrusaSlicer CSG mod to have a PS/2 socket cover for a Soarers converter enclosure
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 206
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This is a basic PrusaSlicer CSG remix of the cover for the original model, with a hole that press-fits a PS/2 socket instead of DIN-5.
I harvested the connector from a cheap PS/2 to USB passive adapter. You can adjust the diameters of the negative-volume cylinders to meet your own needs.
Also changed is the ability to use M3x40 screws instead of M3x50 by deepening the screw holes.